Crank dampner bolt
- SkylinesSuck
- Donator
- Posts: 545
- Joined: February 14th, 2009, 11:11 pm
- Stroker Displacement: 4.6L
- Vehicle Year: 1998
- Vehicle Make: Jeep
- Vehicle Model: Wrangler
- Location: Northern VA
Crank dampner bolt
Anybody got a part number? Is it the same for all 258 and 4.0 cranks?
-
- Posts: 4
- Joined: February 23rd, 2017, 6:39 am
- Vehicle Year: 1988
- Vehicle Make: jeep
- Vehicle Model: comanche
Re: Crank dampner bolt
Should be the same as regular 4.0. If you have a long nose crank you will need a spacer to get the damper completely sucked in tight though
- SkylinesSuck
- Donator
- Posts: 545
- Joined: February 14th, 2009, 11:11 pm
- Stroker Displacement: 4.6L
- Vehicle Year: 1998
- Vehicle Make: Jeep
- Vehicle Model: Wrangler
- Location: Northern VA
- SkylinesSuck
- Donator
- Posts: 545
- Joined: February 14th, 2009, 11:11 pm
- Stroker Displacement: 4.6L
- Vehicle Year: 1998
- Vehicle Make: Jeep
- Vehicle Model: Wrangler
- Location: Northern VA
Re: Crank dampner bolt
For reference, Chrysler discontinued the bolt/washer kit, but I think this Dura-Bond FKA-1 kit will work:
http://www.northernautoparts.com/part/dc-fka1
http://www.northernautoparts.com/part/dc-fka1
-
- Consistent
- Posts: 241
- Joined: October 4th, 2008, 10:53 am
- Stroker Displacement: 4.6
- Vehicle Year: 1993
- Vehicle Make: JEEP
- Vehicle Model: CHEROKEE
Re: Crank dampner bolt
I use a damper bolt for a BBC. Many of them have an extra tall head that the socket can hang on. Works perfect.
- SkylinesSuck
- Donator
- Posts: 545
- Joined: February 14th, 2009, 11:11 pm
- Stroker Displacement: 4.6L
- Vehicle Year: 1998
- Vehicle Make: Jeep
- Vehicle Model: Wrangler
- Location: Northern VA
Re: Crank dampner bolt
Aww crap, wish I would have know that before lol. For the price though, I still could......
-
- Learning to use the board
- Posts: 31
- Joined: October 5th, 2018, 6:07 pm
- Vehicle Year: 2001
- Vehicle Make: Jeep
- Vehicle Model: TJ
Re: Crank dampner bolt
I was planning to use a regular grade 8 bolt of the same length, along with the original thick washer.
-
- Noob
- Posts: 15
- Joined: December 9th, 2017, 9:40 am
- Vehicle Year: 2001
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
Re: Crank dampner bolt
Original bolt is 1/2-20 x 1.25”, for reference.
Who is online
Users browsing this forum: No registered users and 19 guests