Pricing used stroker parts

[cruiser54]

258 12CW crank needs turning.
Six 248 rods
2686 head disassembled
865 block.

A guy here in town is interested in the stuff to build a short block while he drives his worn out 4.0.

Any idea on fair pricing?

[akadeutsch]

I got a complete 258 engine off Craigslist for 100 bucks.

[cruiser54]

I got one for free. I'm trying to get a feel for what the crank and rods are worth in the market.

[akadeutsch]

I would say 100 bucks for the crank and rods and another 100 for the block and head. Although that head is pretty much junk. I would have a hard time paying more.

[cruiser54]

I don't care about the block and head.

I have a 258 crank and rods and want to find a good market value for them from those who are in the know so I don't give them away or charge too much.

[akadeutsch]

I wouldn't pay more than 100 bucks for a 258 crank and rods.

[cruiser54]

I wouldn't pay more than 100 bucks for a 258 crank and rods.

That's you. I wanna find out what market value is. What OTHER people have paid.

[johnj92131]

I paid $75 for a 258 long block. Knew the block had a rod knock. So for $75 I have 6 rods and a crank that needs to be turned. Figured any used crank would need some work and the short rods were a bonus for the money. So I will spend $65 to have the rods resized and just under $100 to have the crank turned. More for a new set of bearings. Shop wanted $300 for a reground crank, bearings and rods were extra. Hope this helps.

[biscuit]

i think i paid $100 for a complete 258

[Russ Pottenger]

A good 12 counterweight 258 crankshaft is worth every bit of $150.00 and another $50.00 for the rods.