thought i would do the honorable thing and introduce myself before i start asking too many questions:
my name is tim, i am from longview washington
i am working with a 1992 xj 4.0 that has started the beginning stages of strokage.
currently it is completely gutted and is getting pretty much a full redo short of a expensive paint job. the rig is intended to be a universal player. it will go to work, grocery store, parts runs, places like moabs tougher trails. it will follow my tj
we plan on going 4.7
anyways.. hello and now i must see what there is to see here!
tim
introduction
-
- Posts: 1
- Joined: June 11th, 2011, 12:36 pm
- Vehicle Year: 1992
- Vehicle Make: jeep
- Vehicle Model: XJ
- Location: Longview WA
- SilverXJ
- Global Moderator
- Posts: 5790
- Joined: February 14th, 2008, 7:14 am
- Stroker Displacement: 4.6L
- Vehicle Year: 2000
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
- Location: Radford, Va
Re: introduction
Welcome aboard Tim!
2000 XJ. 4.6L stroker
00+ Viper Coil Swap | CPS Timing Increase Mod | Fabricated Airbox | Dash bezel, Arduino Multigauge & RD Conceal
Eat, breath, drink, sleep, Jeep, drink
00+ Viper Coil Swap | CPS Timing Increase Mod | Fabricated Airbox | Dash bezel, Arduino Multigauge & RD Conceal
Eat, breath, drink, sleep, Jeep, drink
- JEEP DRIVER
- Making Progress
- Posts: 61
- Joined: April 15th, 2010, 6:10 pm
- Vehicle Year: 1992
- Vehicle Make: JEEP
- Vehicle Model: CHERKEE
Re: introduction
Nice to met you, am sure you will find a lot of useful info here, you will also find a lot of what to do and what not to do but its all part of the fun!!
-
- Posts: 4
- Joined: November 9th, 2012, 7:13 am
Re: introduction
Hi guys
Its andres from Ontario, Canada. I am newbie to this forum. I m 22 years old and still a student of University. I am also doing a part time job on a garage. I am not much familiar with cars so that's why i am joining this forum to expand my knowledge about jeeps. My interests are driving new cars and i like the unique modifications. I hope it will be a great time with you and I will find much stuff for increasing my knowledge. Thanks for reading my intro. Now its your turn...
Its andres from Ontario, Canada. I am newbie to this forum. I m 22 years old and still a student of University. I am also doing a part time job on a garage. I am not much familiar with cars so that's why i am joining this forum to expand my knowledge about jeeps. My interests are driving new cars and i like the unique modifications. I hope it will be a great time with you and I will find much stuff for increasing my knowledge. Thanks for reading my intro. Now its your turn...
-
- Learning to use the board
- Posts: 35
- Joined: May 10th, 2013, 6:20 am
- Stroker Displacement: 4.6
Re: introduction
Not real sure to where put my first post but here it is. I am currently building my first stroker and have found this forum to be full of useful information and big help. Has helped me out with a lot of decisions and made me kick myself in the butt on some others ( yeah I believed comp cams about the 926 springs). Hopefully I can continue to gather good advice and knowledge and get a great motor to enjoy and share with you guys. Guess I'll go start a build thread now so you guys can give me advice, point out silly mistakes, and have a good laugh on the new guy you know the fun stuff.
-
- Posts: 1
- Joined: September 15th, 2013, 9:55 am
- Vehicle Year: 1991
- Vehicle Make: Jeep
- Vehicle Model: XJ
Re: introduction
Hey everyone, my name is Steven or you can call me sstiddy.
I just wanted to introduce myself, say hi, and say I promise to read through as many threads as I can, before I post my questions. I have been researching this build for about 10 years now, so I have a pretty good idea of what I want and can get out of my jeep. I just thought it would be a good idea to learn from other peoples experiences and mistakes so that I can make as few as possible. As I learned in my first build, mistakes cost more than questions. Well, that's it for now. Take care, later!
I just wanted to introduce myself, say hi, and say I promise to read through as many threads as I can, before I post my questions. I have been researching this build for about 10 years now, so I have a pretty good idea of what I want and can get out of my jeep. I just thought it would be a good idea to learn from other peoples experiences and mistakes so that I can make as few as possible. As I learned in my first build, mistakes cost more than questions. Well, that's it for now. Take care, later!
- SilverXJ
- Global Moderator
- Posts: 5790
- Joined: February 14th, 2008, 7:14 am
- Stroker Displacement: 4.6L
- Vehicle Year: 2000
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
- Location: Radford, Va
Re: introduction
Welcome aboard Steven.
2000 XJ. 4.6L stroker
00+ Viper Coil Swap | CPS Timing Increase Mod | Fabricated Airbox | Dash bezel, Arduino Multigauge & RD Conceal
Eat, breath, drink, sleep, Jeep, drink
00+ Viper Coil Swap | CPS Timing Increase Mod | Fabricated Airbox | Dash bezel, Arduino Multigauge & RD Conceal
Eat, breath, drink, sleep, Jeep, drink
Who is online
Users browsing this forum: No registered users and 0 guests