Welcome to www.JeepStrokers.com!!
Not yet a registered user? You are required to Register before you can post within this topic.

Ladies and Gentleman, Boys and girls....

Off topic, play nice. No Nudity, Pornographic material etc..
Post Reply
User avatar
Posts: 33
Joined: March 24th, 2017, 8:18 am
Vehicle Year: 1996
Vehicle Model: Cherokee

Ladies and Gentleman, Boys and girls....

Post by MunkMaster » March 26th, 2017, 7:11 pm

I have been lurking around awhile so I thought I would introduce myself.
I am in the process of building a low budge stroker due too well... Money.
I have a 96 cherokee that has a 4.0 with 212xxx on it until 2 of the piston skirts decided to shatter while I was driving. So I ended up finding a renix that was a jasper reman with 80k on it. Ripped it apart and to my suprise is was bored 40 over. So that sent me on the stroker path faster than I had imagined.
In the motor that fell apart I already had some performance doodads helping me along so I am just going to use them on the stroker. Comp cam, mopar peformance valve springs and retainers, yella terra roller rockers, mild port and polish, 99 intake mani, bored throttle body, gasket matched intake and head, mustang injectors, pace setter header and probably some other stuff that I am not thinking about. I am not sure if I will be using the 4.2 rods or 4.0 rods yet but leaning towards 4.2. I really cant swallow 500 for pistons right now.

Thanks for everyone who has posted questions in posts since the forum was created and the awnsers people have given. That way I dont have to ask them.


Mike. :cheers:

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest