1981 Eagle Stroker
-
- Donator
- Posts: 7
- Joined: August 30th, 2014, 7:06 am
- Stroker Displacement: 285cid
- Vehicle Year: 1981
- Vehicle Make: AMC
- Vehicle Model: Eagle
- Location: Lewistown, Montana
- Contact:
1981 Eagle Stroker
Eagle already had installed:
Mopar MPI multi port injection and engine management
Jeep T5 5 speed trans
New Process 242 Transfer case
Stroker Spec list:
4.0 block, decked .005 and bored .030 oversize
7120 head , ported, oversize valves, HP valve springs
KB 944 pistons, 4.0 rods, balanced as a set
New cam @0.05 215in/219 ex lift .484 in/ .480 ex
4.2 crank, balanced
Ford #24 injectors- ebay
Joe Gibbs racing 5/30 racing oil as break in oil
Got the engine installed last week and fired up. Scary Fast! Studded tires on all 4, very awesome in the snow and ice here in Montana.
You do not have the required permissions to view the files attached to this post.
-
- Donator
- Posts: 7
- Joined: August 30th, 2014, 7:06 am
- Stroker Displacement: 285cid
- Vehicle Year: 1981
- Vehicle Make: AMC
- Vehicle Model: Eagle
- Location: Lewistown, Montana
- Contact:
Re: 1981 Eagle Stroker
Opps, wrong pic, here is the stroker installed
You do not have the required permissions to view the files attached to this post.
-
- My keyboard is getting warn out
- Posts: 1032
- Joined: February 28th, 2008, 3:13 am
- Stroker Displacement: 4.9
- Location: Michigan
Re: 1981 Eagle Stroker
Very nice
-
- Movin on up ^
- Posts: 324
- Joined: December 5th, 2015, 5:26 pm
- Vehicle Year: 1981
- Vehicle Make: amc
- Vehicle Model: eaglesx4
Re: 1981 Eagle Stroker
Wow you are my new lover lmao. I'm putting a 4.7 in my 81 sx4. My biggest question is about the 242 linkage. Please pm me pics on the linkage and especially some measurements to where to put the shifter !!! I fit a spirit gt center counsel in mine so I definitely know I have to cut it for shifter clearance. Been debating on putting a 242 in for awhile.
Who is online
Users browsing this forum: No registered users and 23 guests