Clifford 6=8 upgrade

Swaping 258 to 4.0, 4.0 parts to 258 etc!
Post Reply
brentwood
Posts: 1
Joined: April 18th, 2017, 1:51 pm
Vehicle Year: 1982
Vehicle Make: Jeep
Vehicle Model: Wagoneer

Clifford 6=8 upgrade

Post by brentwood »

I have an 82 wagoneer with a stock 258.
My exhaust manifold is bad and I have a small intake leak.
I'm​ pretty much decided on the Clifford 6=8 kit but considering a 4.0 head swap at same time.
Should I do the head swap and the full Clifford 242 kit
Or keep 258 head with Clifford 258 kit?

Appreciate thoughts and advice
Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests