Welcome to www.JeepStrokers.com!!
Not yet a registered user? You are required to Register before you can post within this topic.

Pilot bearing for 258 crank matched up to 98 AX-15?

Swaping 258 to 4.0, 4.0 parts to 258 etc!
Post Reply
Sharnick
Posts: 8
Joined: December 27th, 2017, 9:54 pm
Vehicle Year: 1998
Vehicle Make: Jeep
Vehicle Model: Wrangler

Pilot bearing for 258 crank matched up to 98 AX-15?

Post by Sharnick » June 4th, 2018, 8:45 pm

Just wondering if anyone knows the correct pilot bearing to use when mating the 258 crank to my 98 ax-15? I bought Part # FC-69907 from advanced auto and got it in, but have been having trouble mounting the trans up to the engine and am wondering if thats why?

Any help is greatly appreciated. :brickwall:

BeRadicle
I think I'll order a "tab"
I think I'll order a "tab"
Posts: 40
Joined: October 2nd, 2014, 8:50 am
Vehicle Year: 1992
Vehicle Make: JEEP
Vehicle Model: Grand YJ

Re: Pilot bearing for 258 crank matched up to 98 AX-15?

Post by BeRadicle » August 19th, 2018, 7:30 pm

i had a 258 infront of a 91-94 ax15 the pilot bearing was a 3/4" inner diameter and was for a 4.0l. did you confirm the pilot you bought was for the ax15 input? i only ask cause i tried a pilot for a 258 and it was too small. I ended up making a brass or copper sleeve for inside the crank to beat the pilot into.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest