Performance mods and Advanced Stroker discussion.
SkylinesSuck
Donator
Posts: 545 Joined: February 14th, 2009, 11:11 pm
Stroker Displacement: 4.6L
Vehicle Year: 1998
Vehicle Make: Jeep
Vehicle Model: Wrangler
Location: Northern VA
Post
by SkylinesSuck » May 1st, 2019, 5:16 pm
cal wrote: ↑ May 1st, 2019, 2:29 pm
You could say that. (Russ and I are very close, he put this one together for me while I watched).
viewtopic.php?f=8&t=6025
Super jealous about that btw
Cummins90
I made it to triple digits!
Posts: 146 Joined: May 14th, 2016, 10:29 am
Vehicle Year: 1996
Vehicle Make: Jeep
Vehicle Model: Cherokee
Post
by Cummins90 » May 2nd, 2019, 7:38 am
That's who I'm going to when finances permit. What year ECU is running this engine?
cal
Making Progress
Posts: 61 Joined: March 19th, 2008, 12:09 pm
Stroker Displacement: 4.71
Post
by cal » May 2nd, 2019, 7:57 am
It's a 2000, federal emissions.
Cummins90
I made it to triple digits!
Posts: 146 Joined: May 14th, 2016, 10:29 am
Vehicle Year: 1996
Vehicle Make: Jeep
Vehicle Model: Cherokee
Post
by Cummins90 » May 3rd, 2019, 12:16 pm
A part throttle boost switch but replaced with a vac switch. No clue if it would work and it seems archaic. As you achieve atmospheric pressure in the manifold a NC under vacuum switch flips to a full 5v signal through a .5v diode. ECU sees 4.5v full throttle. Ignore the red x part of the ground tracing.
You do not have the required permissions to view the files attached to this post.
cal
Making Progress
Posts: 61 Joined: March 19th, 2008, 12:09 pm
Stroker Displacement: 4.71
Post
by cal » May 3rd, 2019, 12:21 pm
It took me a moment to wrap my head around that.
An interesting thought. I'm not sure how practical it is, but interesting.
Cummins90
I made it to triple digits!
Posts: 146 Joined: May 14th, 2016, 10:29 am
Vehicle Year: 1996
Vehicle Make: Jeep
Vehicle Model: Cherokee
Post
by Cummins90 » May 3rd, 2019, 1:11 pm
My 4yr old son and I were coloring. He takes a look at it and says I'm not that good at coloring.
Russ Pottenger
Strong Poster
Posts: 896 Joined: August 15th, 2009, 1:27 am
Stroker Displacement: 4.7
Vehicle Year: 2000
Vehicle Make: Jeep
Vehicle Model: Cherokee
Post
by Russ Pottenger » May 3rd, 2019, 5:43 pm
Cummins90 wrote: ↑ May 3rd, 2019, 1:11 pm
My 4yr old son and I were coloring. He takes a look at it and says I'm not that good at coloring.
Lol, ... That’s awesome.
Cummins90
I made it to triple digits!
Posts: 146 Joined: May 14th, 2016, 10:29 am
Vehicle Year: 1996
Vehicle Make: Jeep
Vehicle Model: Cherokee
Post
by Cummins90 » May 19th, 2019, 8:55 am
The apple didnt fall far from the tree. While I was cleaning I found a few .5v diodes. If you are interested PM me. You would still need a switch.
https://www.worldmagnetics.com/our-swit ... witch.html
Something along these lines but 74kpa may be too low.
Users browsing this forum: Ahrefs [Bot] and 18 guests