Stock elderbrock head on stock 4.0

Performance mods and Advanced Stroker discussion.
User avatar
SkylinesSuck
Donator
Donator
Posts: 545
Joined: February 14th, 2009, 11:11 pm
Stroker Displacement: 4.6L
Vehicle Year: 1998
Vehicle Make: Jeep
Vehicle Model: Wrangler
Location: Northern VA

Re: Stock elderbrock head on stock 4.0

Post by SkylinesSuck »

Dang, that ain't cheap.
Wax
Posts: 9
Joined: January 26th, 2018, 12:50 pm
Stroker Displacement: 4.0
Vehicle Year: 1997
Vehicle Make: Jeep
Vehicle Model: Wrangler

Re: Stock elderbrock head on stock 4.0

Post by Wax »

I'm going over to race the world finials in Vegas in October this year I guess I could ship them all back in my crate I send my Jetski in. I was not really wanting to open up the engine to much but I guess I could. Now if only some one made a plug and play ecu that still runs the dash
Wax
Posts: 9
Joined: January 26th, 2018, 12:50 pm
Stroker Displacement: 4.0
Vehicle Year: 1997
Vehicle Make: Jeep
Vehicle Model: Wrangler

Re: Stock elderbrock head on stock 4.0

Post by Wax »

I sent you a message in face book russ. No answer as of yet
Russ Pottenger
Strong Poster
Strong Poster
Posts: 889
Joined: August 15th, 2009, 1:27 am
Stroker Displacement: 4.7
Vehicle Year: 2000
Vehicle Make: Jeep
Vehicle Model: Cherokee

Re: Stock elderbrock head on stock 4.0

Post by Russ Pottenger »

Wax wrote:I sent you a message in face book russ. No answer as of yet
Sorry, didn't see any notifications on my Facebook.

Shoot me an email at [email protected]
I'll be happy to help you load up your container with Jeep Stroker goodies. :)
User avatar
SkylinesSuck
Donator
Donator
Posts: 545
Joined: February 14th, 2009, 11:11 pm
Stroker Displacement: 4.6L
Vehicle Year: 1998
Vehicle Make: Jeep
Vehicle Model: Wrangler
Location: Northern VA

Re: Stock elderbrock head on stock 4.0

Post by SkylinesSuck »

If you are already doing a container, I think picking up a crank while you are here would be a must, even if you have no plans to open up the bottom end right now.
BcurpKodiak
Making Progress
Making Progress
Posts: 73
Joined: November 2nd, 2015, 8:12 pm
Vehicle Year: 1997
Vehicle Make: Jeep
Vehicle Model: XJ

Re: Stock elderbrock head on stock 4.0

Post by BcurpKodiak »

I highly recommend the rotating assembly, pistons/rods/crank, from Russ
Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot] and 13 guests