Edelbrock head, 2000 intake, 1998 header question?
-
- Consistent
- Posts: 218
- Joined: October 16th, 2014, 3:35 pm
- Stroker Displacement: 4.6
- Vehicle Year: 2000
- Vehicle Make: XJ
- Vehicle Model: Sport
Edelbrock head, 2000 intake, 1998 header question?
Well I have been suffering with an exhaust leak on my stroker since installed in my 2000XJ. I have the Edelbrock head (pre-99 exhaust ports) and 2000 HO intake with a Banks header for a 2000 XJ . I realized recently that the header and cylinder head don't really match due to the port designs.This of course may be a solid cause for my exhaust leak or at least a restriction or blown out gasket. My question is, will a pre-99 style header and down pipe clear the HO intake and bolt up to the catalytic converter? Also what gasket would you recommend?
- IH 392
- I love JeepStrokers.com!!
- Posts: 725
- Joined: October 4th, 2008, 11:15 am
- Location: Eugene ORYGUN
- Contact:
Re: Edelbrock head, 2000 intake, 1998 header question?
The late intake is compatible with the earlier header, it bolted right on my '97 TJ, the earlier header will require head pipe mods, they are not compatible.
You can get more power out of ANY engine!!!
ASE Master certified engine machinist, gas and diesel
ASE Master certified engine machinist, gas and diesel
- Cheromaniac
- I live here
- Posts: 3187
- Joined: March 8th, 2008, 12:58 pm
- Stroker Displacement: 4563cc
- Vehicle Year: 1992
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
- Location: Cyprus
- Contact:
Re: Edelbrock head, 2000 intake, 1998 header question?
The answer to your first question is yes, and you'll need an OEM combination intake/exhaust manifold gasket for the '91-'98 models.nicpaige wrote:My question is, will a pre-99 style header and down pipe clear the HO intake and bolt up to the catalytic converter? Also what gasket would you recommend?
1992 XJ 4.6 I6 - 5MT - Stroker build-up, Stroker "recipes" Sold
1995 Mustang GT - 4AT - Modded Sold
2006 Mustang GT - 5MT - Modded Midlife Crisis Car
1995 Mustang GT - 4AT - Modded Sold
2006 Mustang GT - 5MT - Modded Midlife Crisis Car
-
- Consistent
- Posts: 218
- Joined: October 16th, 2014, 3:35 pm
- Stroker Displacement: 4.6
- Vehicle Year: 2000
- Vehicle Make: XJ
- Vehicle Model: Sport
Re: Edelbrock head, 2000 intake, 1998 header question?
Thanks for the replies. Looks like I will have a Banks header for a 2000 XJ for sale soon.
- SkylinesSuck
- Donator
- Posts: 545
- Joined: February 14th, 2009, 11:11 pm
- Stroker Displacement: 4.6L
- Vehicle Year: 1998
- Vehicle Make: Jeep
- Vehicle Model: Wrangler
- Location: Northern VA
Re: Edelbrock head, 2000 intake, 1998 header question?
I thought the ports on most of not all aftermarket headers were all large enough to mate to the old style heads and that the only real difference was the outlet(s)?
-
- Strong Poster
- Posts: 891
- Joined: August 15th, 2009, 1:27 am
- Stroker Displacement: 4.7
- Vehicle Year: 2000
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
Re: Edelbrock head, 2000 intake, 1998 header question?
X2,SkylinesSuck wrote:I thought the ports on most of not all aftermarket headers were all large enough to mate to the old style heads and that the only real difference was the outlet(s)?
That's been my understanding also.
If I'm wrong please school me.
-
- Consistent
- Posts: 218
- Joined: October 16th, 2014, 3:35 pm
- Stroker Displacement: 4.6
- Vehicle Year: 2000
- Vehicle Make: XJ
- Vehicle Model: Sport
Re: Edelbrock head, 2000 intake, 1998 header question?
Just copied this off Edelbrock site.
"The Performer Jeep 4.0L is designed with 1991-2006 4.0L intake port locations and must be used with 1991-2006 intake manifold. The Performer Jeep 4.0L is designed with 1991-98 4.0L exhaust port locations and must be used with 1991-98 factory header or aftermarket exhaust header."
Maybe their is hope. Thanks for bringing that up guys.
"The Performer Jeep 4.0L is designed with 1991-2006 4.0L intake port locations and must be used with 1991-2006 intake manifold. The Performer Jeep 4.0L is designed with 1991-98 4.0L exhaust port locations and must be used with 1991-98 factory header or aftermarket exhaust header."
Maybe their is hope. Thanks for bringing that up guys.
-
- Consistent
- Posts: 218
- Joined: October 16th, 2014, 3:35 pm
- Stroker Displacement: 4.6
- Vehicle Year: 2000
- Vehicle Make: XJ
- Vehicle Model: Sport
Re: Edelbrock head, 2000 intake, 1998 header question?
Okay follow up question. It looks as if when you buy a header it many times comes with a gasket. Is this gasket made especially for the size of the header tube openings or simply the same as a stock manifold gasket for that particular year head?
-
- Strong Poster
- Posts: 891
- Joined: August 15th, 2009, 1:27 am
- Stroker Displacement: 4.7
- Vehicle Year: 2000
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
Re: Edelbrock head, 2000 intake, 1998 header question?
It depends on the header manufacture.nicpaige wrote:Okay follow up question. It looks as if when you buy a header it many times comes with a gasket. Is this gasket made especially for the size of the header tube openings or simply the same as a stock manifold gasket for that particular year head?
Some come with the court dimensions of a stock Fel-Pro replacement gasket, and some come larger.
I have a gasket company that specifically makes a gasket for me. It's a special material that has a wire center core with graphite composition outer. It's soft enough where I'll take a good bite but yet won't burn through.
-
- Consistent
- Posts: 218
- Joined: October 16th, 2014, 3:35 pm
- Stroker Displacement: 4.6
- Vehicle Year: 2000
- Vehicle Make: XJ
- Vehicle Model: Sport
Re: Edelbrock head, 2000 intake, 1998 header question?
I called Banks and they said to just pick up a stock gasket for a 98 XJ. So do you sell these gaskets Russ?
-
- Strong Poster
- Posts: 891
- Joined: August 15th, 2009, 1:27 am
- Stroker Displacement: 4.7
- Vehicle Year: 2000
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
Re: Edelbrock head, 2000 intake, 1998 header question?
Yes.nicpaige wrote:I called Banks and they said to just pick up a stock gasket for a 98 XJ. So do you sell these gaskets Russ?
Shoot me an email and I'll ship you one.
I'll just charge you the freight.
Russ Pottenger
Bishop-Buehl Racing Engines
531 N. Lyall Avenue
West Covina, California 91790
(626) 673-2203
Email/PayPal: [email protected]
-
- Consistent
- Posts: 218
- Joined: October 16th, 2014, 3:35 pm
- Stroker Displacement: 4.6
- Vehicle Year: 2000
- Vehicle Make: XJ
- Vehicle Model: Sport
-
- Strong Poster
- Posts: 891
- Joined: August 15th, 2009, 1:27 am
- Stroker Displacement: 4.7
- Vehicle Year: 2000
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
Re: Edelbrock head, 2000 intake, 1998 header question?
Left on FedEx yesterday.nicpaige wrote:Email sent.
Tossed in a extra gasket for a spare.
- SkylinesSuck
- Donator
- Posts: 545
- Joined: February 14th, 2009, 11:11 pm
- Stroker Displacement: 4.6L
- Vehicle Year: 1998
- Vehicle Make: Jeep
- Vehicle Model: Wrangler
- Location: Northern VA
Re: Edelbrock head, 2000 intake, 1998 header question?
That's awesome man. Thanks for helping out the community like that.
-
- Consistent
- Posts: 218
- Joined: October 16th, 2014, 3:35 pm
- Stroker Displacement: 4.6
- Vehicle Year: 2000
- Vehicle Make: XJ
- Vehicle Model: Sport
Re: Edelbrock head, 2000 intake, 1998 header question?
Thanks so much Russ!
Who is online
Users browsing this forum: No registered users and 22 guests