Welcome to www.JeepStrokers.com!!
Not yet a registered user? You are required to Register before you can post within this topic.

Stroker kit opinions

Performance mods and Advanced Stroker discussion.
Post Reply
Sammyguy
Posts: 7
Joined: September 3rd, 2019, 8:12 pm
Vehicle Year: 2002
Vehicle Make: Jeep
Vehicle Model: Tj sport

Stroker kit opinions

Post by Sammyguy » March 15th, 2020, 7:15 pm

Opinions on this kit https://www.cleggengine.com/stroker-kit ... -kits.html and this cam combo https://www.cleggengine.com/jeep-4-0l-s ... t-kit.html I recently purchased both and the block is currently being bored 30 thou over and honed. I also oreded the 24 lbs 6 hole injectors from them as well what kind of power should i expect?

Sammyguy
Posts: 7
Joined: September 3rd, 2019, 8:12 pm
Vehicle Year: 2002
Vehicle Make: Jeep
Vehicle Model: Tj sport

Re: Stroker kit opinions

Post by Sammyguy » March 15th, 2020, 7:16 pm

Ordered the stage 2 stroker to be clear

User avatar
Cheromaniac
Senior Member
Senior Member
Posts: 2795
Joined: March 8th, 2008, 12:58 pm
Stroker Displacement: 4563cc
Vehicle Year: 1992
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Cyprus
Contact:

Re: Stroker kit opinions

Post by Cheromaniac » March 15th, 2020, 10:15 pm

The low 8.8:1 compression combined with the longer duration cam isn't ideal for low rev torque production. On the plus side, you'll have no problem running 87 octane fuel.
The Clegg kit is fine except for the ICON pistons that leave ~0.027" of deck clearance unless you mill the block deck.
1992 XJ 4.6 Stroker - 5MT - Sold :cry: Stroker build-up, Stroker "recipes"
2006 Mustang GT - 5MT - Midlife crisis car :D with Mods

Sammyguy
Posts: 7
Joined: September 3rd, 2019, 8:12 pm
Vehicle Year: 2002
Vehicle Make: Jeep
Vehicle Model: Tj sport

Re: Stroker kit opinions

Post by Sammyguy » March 16th, 2020, 11:38 am

As long as it makes more power im happy i dont do much low speed rock crawling anyways I do more sand and mud and am looking to turbo or supercharge in the future

Cummins90
I made it to triple digits!
I made it to triple digits!
Posts: 109
Joined: May 14th, 2016, 10:29 am
Vehicle Year: 1996
Vehicle Make: Jeep
Vehicle Model: Cherokee

Re: Stroker kit opinions

Post by Cummins90 » March 17th, 2020, 7:18 am

Sammyguy wrote:
March 16th, 2020, 11:38 am
looking to turbo or supercharge in the future
Let me know if you go this route and I'll set you up with parts.

User avatar
Cheromaniac
Senior Member
Senior Member
Posts: 2795
Joined: March 8th, 2008, 12:58 pm
Stroker Displacement: 4563cc
Vehicle Year: 1992
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Cyprus
Contact:

Re: Stroker kit opinions

Post by Cheromaniac » March 17th, 2020, 11:35 pm

Sammyguy wrote:
March 16th, 2020, 11:38 am
I do more sand and mud and am looking to turbo or supercharge in the future
Since you're likely to add forced induction, your chosen combo will be fine.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests