Welcome to www.JeepStrokers.com!!
Not yet a registered user? You are required to Register before you can post within this topic.

How to properly index your distributor or cam sensor

All FAQ's Go here... Most basic questions can be answered if you look here!
Post Reply
User avatar
Global Moderator
Global Moderator
Posts: 5793
Joined: February 14th, 2008, 7:14 am
Stroker Displacement: 4.6L
Vehicle Year: 2000
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Radford, Va

How to properly index your distributor or cam sensor

Post by SilverXJ » November 3rd, 2011, 7:15 pm

To index the distributor see here: http://www.angelfire.com/my/fan/dist_index.html. You may need to cut one of the ears if you installed and aftermarket cam

To index the cam sensor (00+ TJ and XJ, 99+ WJ) see here: http://jeep.blackonyx.net/pdfs/jcss.pdf, page 5 of the PDF.

In both cases you need to make sure you are on TDC of the compression stroke of cylinder #1.

Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests