No engine Girdle

For all non stroker / performance related problems and discussion.
Post Reply
jamesgrammer
Posts: 5
Joined: August 27th, 2017, 6:29 am
Vehicle Year: 1989
Vehicle Make: Jeep
Vehicle Model: YJ

No engine Girdle

Post by jamesgrammer »

I have a 92 Cherokee 4.0L that I am using as my base for my stroker and I noticed that when I pulled the oil pan on disassembly the was no engine girdle.All the videos I see they have to raise the girdle so the rods will clear with the deeper stroke on the crank, my engine does not have one. Will that be a problem? This is my first engine build so excuse my ignorance.
jasonb
Making Progress
Making Progress
Posts: 52
Joined: August 7th, 2015, 5:59 pm
Vehicle Year: 1996
Vehicle Make: Jeep
Vehicle Model: Cherokee

Re: No engine Girdle

Post by jasonb »

They didn't start putting those in 'till later years, 94 or 95. You're fine without it, it's not much of a girdle.
jamesgrammer
Posts: 5
Joined: August 27th, 2017, 6:29 am
Vehicle Year: 1989
Vehicle Make: Jeep
Vehicle Model: YJ

Re: No engine Girdle

Post by jamesgrammer »

jasonb wrote:They didn't start putting those in 'till later years, 94 or 95. You're fine without it, it's not much of a girdle.
Thank you
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests