Welcome to www.JeepStrokers.com!!
Not yet a registered user? You are required to Register before you can post within this topic.

NEW JEEP 3.8 CRANKSHAFTS

Look here for deals on parts from specific vendors!
Post Reply
Notalent
Posts: 4
Joined: July 24th, 2009, 12:24 pm

NEW JEEP 3.8 CRANKSHAFTS

Post by Notalent » February 19th, 2015, 1:05 pm

Hey Guys!

Just wanted to let you all know we have got with Scat to Develop a Proprietary Jeep 3.8L Crankshaft to replace the OE Cranks that are known for being weak! We are Retailing these for $499.00 shipped in the main 48 states. These are ONLY available from ATK.

Give us a call at 866-721-2315

Image

Image

jeepxj3
Movin on up ^
Movin on up ^
Posts: 372
Joined: December 5th, 2013, 1:55 am
Stroker Displacement: 4.6
Vehicle Year: 1998
Vehicle Make: jeep
Vehicle Model: xj

Re: NEW JEEP 3.8 CRANKSHAFTS

Post by jeepxj3 » February 20th, 2015, 3:14 am

Now if you would only make a stroker crank.

Say- stock 3.430" + 0.270" = 3.700" stroke
Add custom forged pistons with higher pin height, stock 3.780" + 0.030" = 3.810" bore
Stroker displacement 4.15L

Notalent
Posts: 4
Joined: July 24th, 2009, 12:24 pm

Re: NEW JEEP 3.8 CRANKSHAFTS

Post by Notalent » February 20th, 2015, 8:09 am

Zach @ 505 Performance is doing this with our cranks. I may put one into production once I get the feel for the market.

beiwulf
Donator
Donator
Posts: 208
Joined: September 18th, 2013, 11:18 am
Stroker Displacement: 4.7Turbo soonish
Vehicle Year: 1995
Vehicle Make: ZJ
Vehicle Model: Laredo
Location: So.Cal

Re: NEW JEEP 3.8 CRANKSHAFTS

Post by beiwulf » March 22nd, 2015, 8:12 pm

I'd trust Zach Steele @ 505 like i would trust a sieve to hold water from my personal experience. I was let down from a personal transaction time and time again. He seemed to want to weasel out of being a stand up guy and couldn't hold his word to me. He chose on multiple occasions to be a snake in the grass when I dealt with him. Without regard to customer service and integrity. I could only encourage you to do your due diligence and research business's and product. Marketing doesn't give you everything you hope for.

http://www.hesco.us
is a good company - but you pay for there experience and customer service.

For crankshafts I use a local shop well known in Los Angeles and Orange County
Castillo's Crankshaft
14654 1/2 Firestone Blvd
La Mirada, CA 90638
(714) 523-0321

some postings regarding Joe Castillo and his shop's work
http://www.superstreetonline.com/how-to ... t-service/
http://www.motortopia.com/worldofrods/t ... -one-1684/
http://forums.clubrsx.com/showthread.php?t=252476

He's a great guy to deal with and will spend the time to help you. He can do custom offset grinds for your crankshaft too. Years ago Clifford used to compete with offset jeep crankshaft grind and as I believe it this shop used to do those for the 4.06 grind using the honda rod journals. 1.779"

good luck,
Brian
95 Silver ZJ 4x4 4.0L (soon to be stroked/boosted) currently DD
1999 Victory V92 (first year production) street bike/cruiser

95 ZJ Turbo Boosted Stroker build threadhttp://www.jeepstrokers.com/forum/viewt ... f=8&t=4342

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest