Welcome to www.JeepStrokers.com!!
Not yet a registered user? You are required to Register before you can post within this topic.

Calculator...

Check here for most things forum related... NOT stroker related!
Post Reply
User avatar
Exos
Consistent
Consistent
Posts: 280
Joined: December 2nd, 2008, 1:35 pm
Stroker Displacement: 4.7L
Vehicle Year: 1998
Vehicle Make: Jeep
Vehicle Model: XJ
Location: Quebec, Canada

Re: Calculator...

Post by Exos » April 21st, 2009, 6:36 pm

While you're at it, why not add the Crower cams too?

http://www.angelfire.com/my/fan/Jeep4.0Camshafts.htm

User avatar
laxplayermjd
Making Progress
Making Progress
Posts: 94
Joined: March 25th, 2009, 4:08 pm
Vehicle Year: 1988
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Memphis, TN
Contact:

Re: Calculator...

Post by laxplayermjd » May 8th, 2009, 7:35 pm

anybody else want these cams added too? im gettin my block back tomorrow gonna be getting ready to play with the calculator a bunch. Leaning towards mopar cam because i can get a sweet deal but also want to calculate with lunati also.
BMW Master Tech
ASE Master Tech
Even BMW guys need a toy.
In process 4.6l Renix Build.

User avatar
Muad'Dib
Site Admin / Owner
Site Admin / Owner
Posts: 1489
Joined: January 8th, 2008, 10:55 am
Stroker Displacement: 4.7L
Vehicle Year: 1990
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Bend, Oregon
Contact:

Re: Calculator...

Post by Muad'Dib » May 12th, 2009, 2:42 pm

SilverXJ wrote:Some Other cams you can add to the calc if you want:

Comp Cams: (all 4* advance built in)
part; duration; lsa
68-115-4; 240; 108
68-200-4; 252; 110
68-201-4; 260; 110
68-232-4; 250; 113
68-239-4; 262; 111

Isky: (all 0* advance built in)
part; duration; lsa
1331M; 248; 108
133126; 262; 108
133127; 270; 109
133128; 280; 109

Lunati (all 4* advance built in)
part; duration; lsa
63500; 250; 112
63501; 256; 112
63502; 262; 112
63503; 268; 110
Someone in another thread mentioned that the comp cam info given here is incorrect. Can someone please check on these and give me the correct information? Thanks!

Also, if you guys want other cams added you will need to post the information on that cam in this thread, just as silverxj did in the quoted post above. Manufacturer, Model, Duration, LSA, Advance/Retard. Thanks very much!
If it feels right, then STROKE it!
You're lucky that hundred shot of CAPS LOCK didn't blow the welds on the forum!!

User avatar
laxplayermjd
Making Progress
Making Progress
Posts: 94
Joined: March 25th, 2009, 4:08 pm
Vehicle Year: 1988
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Memphis, TN
Contact:

Re: Calculator...

Post by laxplayermjd » May 12th, 2009, 4:12 pm

Mopar
Part, Duration, lsa, Advance/retard
P4529228AB , 240*, 108*, 0 Advance/retard

Also as stated in another post Comp Cam data incorrect

From angelfire

68-232-4 , 250*, 107*, therefore 4* Advance

Comp Cams datasheet shows
Source http://www.compcams.com/Cam_Specs/
Some one else can verify, possible ive made a mistake

68-115-4, 240*, 108*, 0 Advance/retard
68-232-4, 250*, 110*, 3* Advanced
BMW Master Tech
ASE Master Tech
Even BMW guys need a toy.
In process 4.6l Renix Build.

User avatar
SilverXJ
Global Moderator
Global Moderator
Posts: 5793
Joined: February 14th, 2008, 7:14 am
Stroker Displacement: 4.6L
Vehicle Year: 2000
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Radford, Va
Contact:

Re: Calculator...

Post by SilverXJ » May 12th, 2009, 4:17 pm

laxplayermjd wrote:Mopar
Part, Duration, lsa, Advance/retard
P4529228AB , 240*, 108*, 0 Advance/retard

Also as stated in another post Comp Cam data incorrect

From angelfire

68-232-4 , 250*, 107*, therefore 4* Advance

Comp Cams datasheet shows
Source http://www.compcams.com/Cam_Specs/
Some one else can verify, possible ive made a mistake

68-115-4, 240*, 108*, 0 Advance/retard
68-232-4, 250*, 110*, 3* Advanced
The 4* I got was from asking cam if all their 4.2L cams had 4* advance... I must had a lazy tech, and they said yes.

Looking at my grind card from my old 68-232-4 the specs are 250*, 113* LSA, and 3* advance. 110* is the intake center line.
Last edited by SilverXJ on May 12th, 2009, 6:00 pm, edited 1 time in total.

User avatar
Muad'Dib
Site Admin / Owner
Site Admin / Owner
Posts: 1489
Joined: January 8th, 2008, 10:55 am
Stroker Displacement: 4.7L
Vehicle Year: 1990
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Bend, Oregon
Contact:

Re: Calculator...

Post by Muad'Dib » May 12th, 2009, 4:28 pm

so... what do i put in there :banghead:
If it feels right, then STROKE it!
You're lucky that hundred shot of CAPS LOCK didn't blow the welds on the forum!!

User avatar
laxplayermjd
Making Progress
Making Progress
Posts: 94
Joined: March 25th, 2009, 4:08 pm
Vehicle Year: 1988
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Memphis, TN
Contact:

Re: Calculator...

Post by laxplayermjd » May 12th, 2009, 4:32 pm

68-232-4, 250*, 113*, 3* Advanced

I had the lsa and intake centerline backwards, my mistake :frustrated: .

Silverxj, verify this?
BMW Master Tech
ASE Master Tech
Even BMW guys need a toy.
In process 4.6l Renix Build.

User avatar
SilverXJ
Global Moderator
Global Moderator
Posts: 5793
Joined: February 14th, 2008, 7:14 am
Stroker Displacement: 4.6L
Vehicle Year: 2000
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Radford, Va
Contact:

Re: Calculator...

Post by SilverXJ » May 12th, 2009, 6:00 pm

I concur

User avatar
Muad'Dib
Site Admin / Owner
Site Admin / Owner
Posts: 1489
Joined: January 8th, 2008, 10:55 am
Stroker Displacement: 4.7L
Vehicle Year: 1990
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Bend, Oregon
Contact:

Re: Calculator...

Post by Muad'Dib » May 14th, 2009, 1:08 pm

I fixed the comp cam, and added the mopar cam that was provided.
If it feels right, then STROKE it!
You're lucky that hundred shot of CAPS LOCK didn't blow the welds on the forum!!

User avatar
Muad'Dib
Site Admin / Owner
Site Admin / Owner
Posts: 1489
Joined: January 8th, 2008, 10:55 am
Stroker Displacement: 4.7L
Vehicle Year: 1990
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Bend, Oregon
Contact:

Re: Calculator...

Post by Muad'Dib » August 3rd, 2009, 3:48 pm

Is this still working out good for everyone?
If it feels right, then STROKE it!
You're lucky that hundred shot of CAPS LOCK didn't blow the welds on the forum!!

User avatar
laxplayermjd
Making Progress
Making Progress
Posts: 94
Joined: March 25th, 2009, 4:08 pm
Vehicle Year: 1988
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Memphis, TN
Contact:

Re: Calculator...

Post by laxplayermjd » August 8th, 2009, 7:17 am

yes, great for me
BMW Master Tech
ASE Master Tech
Even BMW guys need a toy.
In process 4.6l Renix Build.

User avatar
Exos
Consistent
Consistent
Posts: 280
Joined: December 2nd, 2008, 1:35 pm
Stroker Displacement: 4.7L
Vehicle Year: 1998
Vehicle Make: Jeep
Vehicle Model: XJ
Location: Quebec, Canada

Re: Calculator...

Post by Exos » August 29th, 2009, 6:16 pm

How come the OEM cam info is missing years 91-98 ? Is there a difference between a 98 HO cam and a '99 ? And how come the LSA and duration are different from Dino's page?

User avatar
Muad'Dib
Site Admin / Owner
Site Admin / Owner
Posts: 1489
Joined: January 8th, 2008, 10:55 am
Stroker Displacement: 4.7L
Vehicle Year: 1990
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Bend, Oregon
Contact:

Re: Calculator...

Post by Muad'Dib » August 30th, 2009, 10:23 am

I think the difference is because we are using seat to seat values, and he is using @.050.

I could be wrong though, as i have just gone off of what people have given me in this thread. If they need to be changed, or if cams need to be added please give me the proper information.
If it feels right, then STROKE it!
You're lucky that hundred shot of CAPS LOCK didn't blow the welds on the forum!!

User avatar
Exos
Consistent
Consistent
Posts: 280
Joined: December 2nd, 2008, 1:35 pm
Stroker Displacement: 4.7L
Vehicle Year: 1998
Vehicle Make: Jeep
Vehicle Model: XJ
Location: Quebec, Canada

Re: Calculator...

Post by Exos » August 30th, 2009, 10:32 am

He's not using 0.050 alone, he states advertised as well. My question is why is it different from our calculator?

I need this info badly, as I am there : cam choice. I'll be buying in the next few weeks.

Years missing, and strange numbers for the stock HO cam..... could someone verify this please? My only reference is Dino's page. If it's right, and I'm pretty sure it is, then some data in the calculator are wrong.

Bodo
Donator
Donator
Posts: 247
Joined: July 31st, 2008, 12:28 pm

Re: Calculator...

Post by Bodo » August 30th, 2009, 12:13 pm

According to my literature, 87-95 used the same melling camshaft: MC809

96-98 XJ/ZJ & 97-99 TJ: MC1376

99-04 XJ/WJ & 00-06 Wrangler: MC1377

You can get specs from: http://www.mellingengine.com/Portals/5/ ... ations.pdf

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests