Welcome to www.JeepStrokers.com!!
Not yet a registered user? You are required to Register before you can post within this topic.

Welcome to the forums!!

Check here for most things forum related... NOT stroker related!
stroked'73
Making Progress
Making Progress
Posts: 79
Joined: March 30th, 2008, 1:35 pm
Stroker Displacement: 4.6L
Vehicle Year: 1973
Vehicle Make: Jeep
Vehicle Model: Wagoneer
Location: Montpelier, Vermont

Re: Welcome to the forums!!

Postby stroked'73 » March 30th, 2008, 2:03 pm

This forum is AWESOME!!!!

I'm so glad this became a reality!! The yahoo site was good, but this one will be so much easier to search in and navigate around in general. I hope this forum goes far. I actually discovered it during a google search, and sorta did a double-take when I saw the site name! I remember the discussion on the yahoo site about this, but hadn't been there in a while, so I was pleasently surprised to find that it got started.

To all those that made it possible: thank you all so much for your efforts and time. :cheers:

I love the name, and the logo ROCKS!!!! 8-)

(member #114)
1973 Jeep Wagoneer - 4.6L basic stroker, Q-jet/Offy dualport, Comp 68-231, .043" HG, 9.79 scr/8.56 dcr, crappy quench

User avatar
Flash
I love JeepStrokers.com!!
I love JeepStrokers.com!!
Posts: 693
Joined: February 17th, 2008, 10:45 pm

Re: Welcome to the forums!!

Postby Flash » March 30th, 2008, 4:30 pm

stroked'73 wrote:This forum is AWESOME!!!!

I'm so glad this became a reality!! The yahoo site was good, but this one will be so much easier to search in and navigate around in general. I hope this forum goes far. I actually discovered it during a google search, and sorta did a double-take when I saw the site name! I remember the discussion on the yahoo site about this, but hadn't been there in a while, so I was pleasently surprised to find that it got started.

To all those that made it possible: thank you all so much for your efforts and time. :cheers:

I love the name, and the logo ROCKS!!!! 8-)

(member #114)


Welcome, and thanks for adding to the growth of this sight! ;)

Flash
89 XJ with 300,000 on the original eng

"I've also never completed a motor, yet. My mouth (fingers) is also writing checks my ass can't cash."

User avatar
Muad'Dib
Site Admin / Owner
Site Admin / Owner
Posts: 1479
Joined: January 8th, 2008, 10:55 am
Stroker Displacement: 4.7L
Vehicle Year: 1990
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Bend, Oregon
Contact:

Re: Welcome to the forums!!

Postby Muad'Dib » March 31st, 2008, 8:23 am

Welcome and dont forget to spread the word!!
If it feels right, then STROKE it!
You're lucky that hundred shot of CAPS LOCK didn't blow the welds on the forum!!

User avatar
FrankZ
Making Progress
Making Progress
Posts: 93
Joined: April 3rd, 2008, 6:44 am
Stroker Displacement: 4.6l

Re: Welcome to the forums!!

Postby FrankZ » April 4th, 2008, 9:19 pm

Guess I should've checked in before I started posting.

Hi!!
97 XJ, 4.6L, AW4 and a few other homebrew goodies. :cheers:

User avatar
IH 392
I love JeepStrokers.com!!
I love JeepStrokers.com!!
Posts: 667
Joined: October 4th, 2008, 11:15 am
Location: Eugene ORYGUN
Contact:

Re: Welcome to the forums!!

Postby IH 392 » October 4th, 2008, 11:34 am

Guess I'm the new guy here, just found this sight!, SWEET!, TON'S of great info, been collecting parts for my TJ stroker for a couple of years now, with all the experience here it's going to ROCK!!!!
You can get more power out of ANY engine!!!
ASE Master certified engine machinist, gas and diesel

Mr-TT
Posts: 6
Joined: October 17th, 2016, 11:19 am
Vehicle Year: 1999
Vehicle Make: Jeep
Vehicle Model: Grand cher

Re: Welcome to the forums!!

Postby Mr-TT » October 24th, 2016, 4:41 am

Hello hello tec and tuner first jeep wj

TheGerman
Posts: 4
Joined: February 2nd, 2017, 6:56 am

Re: Welcome to the forums!!

Postby TheGerman » February 2nd, 2017, 7:13 am

hello at all

this forum is great!
try to build a stroker from my 92 4.0.
found lots of information here.
i'm from germany. my english is not the best. i'm sorry for this

greatings Matze
98 XJ, 2"Ome, Lpg
92 YJ, AW4, NP242, Re4", 30Spline YukonZipLockers, 4.56, 35"Pitbull Rockers and some more...

WJrazz
Posts: 7
Joined: July 15th, 2017, 1:30 pm
Vehicle Year: 2001
Vehicle Make: Jeep
Vehicle Model: WJ limited

Re: Welcome to the forums!!

Postby WJrazz » July 15th, 2017, 1:55 pm

Hi Guys,

Newbie mod enthusiast here. Into my 4th Jeep since 1992-3?
1 XJ Wagoneer limited '88.
2 XJ Wagoneer limited 89. (after the other one was totalled)
3. ZJ Laredo 4WD '94.
4. Current WJ 2001 GC Limited 4L Quadra Drive 250K+ miles
Bilstein shocks and new dif seals about 4 years back.
Complete cooling system rebuild and transfer case rebuild last year.
New CV axles this year. Tranny still doing OK with some minor leakage. Well maintained.
Original engine is still oil tight and running good, but making worn valve lifter noises.
Usually just trade up a few years, but I like the WJ so much I think I'd rather spend the money on it. Thinking about dropping a basic Golen 4.6L stroker into this one. Nothing too radical.

All of the above were utility daily driver work and play vehicles, used for some towing and light logging road kind of off road camping trips. Lots of miles with routine maintenance and repairs as needed.
Any other similar WJ drivers out there?

David Rasberry

mvktr2
Posts: 1
Joined: November 9th, 2017, 10:20 am
Stroker Displacement: 4.0
Vehicle Year: 1990
Vehicle Make: Jeep
Vehicle Model: Cherokee

Re: Welcome to the forums!!

Postby mvktr2 » November 9th, 2017, 10:57 am

I'm new here, first post. Thank you for the forum!

I've owned a 90 Cherokee for almost 15 years and it's 2nd engine just went poop! So I'm building something to put in it. (probably going with the Titan Engine's 'Complete Engine Upgrade Kit')

Among my concerns are the Renix system/cpu as it relates to fuel delivery and compatibility with a more aggressive cam.
Where should I post this question so as not to hijack the thread?

User avatar
SkylinesSuck
Donator
Donator
Posts: 280
Joined: February 14th, 2009, 11:11 pm
Stroker Displacement: 4.6L
Vehicle Year: 1998
Vehicle Make: Jeep
Vehicle Model: Wrangler
Location: Northern VA

Re: Welcome to the forums!!

Postby SkylinesSuck » November 9th, 2017, 2:16 pm

Welcome! Post in the basic stroker forum I'd guess. Talk to Russ before you order your kit from Titan.


Return to “General Board Discussion”

Who is online

Users browsing this forum: No registered users and 1 guest