Welcome to www.JeepStrokers.com!!
Not yet a registered user? You are required to Register before you can post within this topic.

4.7L, high compression, long rod, stroker project/parts for sale.

Posts here will be deleted automatically after 45 days from the last post.
hot_rod_hooligans
I think I'll order a "tab"
I think I'll order a "tab"
Posts: 49
Joined: June 22nd, 2008, 1:25 pm

4.7L, high compression, long rod, stroker project/parts for sale.

Postby hot_rod_hooligans » April 6th, 2017, 2:07 am

Stroker parts near Indianapolis/Richmond IN.
WJ block unknown mileage, was pulled for a spun bearing #1 cylinder, it was thermo-blasted about 5 years ago, has some surface rust(currently coated in fluid film) to keep from getting any worse, has not had any machine work done yet
CJ 258 crank and snout spacer, 04 TJ 4.0 connecting rods only has about 13k on them
Keith Black high compression forged pistons +.060 over
04 TJ TUPY 0331 head with about 13k on it, was thermo-blasted with the block some surface rust, ported but not polished(currently coated in fluid film), before and after pictures included
2 Comp Cams, one custom grind mild for use with the stock valve springs(pic of cam card included below), and as well as p/n 68-239-4 wild for high compression, big lope
Comp timing chain set and lifters
Victor-Reinz complete gasket set
MORE Bombproof block brackets(tacked welded together) pictured

I think I've got a couple different stock valve covers and oil pans, 99+ intake, 00+ factory exhaust manifolds, about 13k on them, sand blasted, I'm sure there's more that I'm forgetting.

I know what I've got in it, not sure what parts are going for now, I'd like to sell as a whole or mostly intact, but can sell individually. $1200 for the whole lot. If you are interested in partial, tell me what you are interested in and we'll see if we can't come to an agreement on a price.
You do not have the required permissions to view the files attached to this post.

hot_rod_hooligans
I think I'll order a "tab"
I think I'll order a "tab"
Posts: 49
Joined: June 22nd, 2008, 1:25 pm

Re: 4.7L, high compression, long rod, stroker project/parts for sale.

Postby hot_rod_hooligans » April 6th, 2017, 2:08 am

Crank
You do not have the required permissions to view the files attached to this post.
Last edited by hot_rod_hooligans on April 6th, 2017, 2:12 am, edited 1 time in total.

hot_rod_hooligans
I think I'll order a "tab"
I think I'll order a "tab"
Posts: 49
Joined: June 22nd, 2008, 1:25 pm

Re: 4.7L, high compression, long rod, stroker project/parts for sale.

Postby hot_rod_hooligans » April 6th, 2017, 2:09 am

Port work
You do not have the required permissions to view the files attached to this post.
Last edited by hot_rod_hooligans on April 6th, 2017, 2:11 am, edited 1 time in total.

hot_rod_hooligans
I think I'll order a "tab"
I think I'll order a "tab"
Posts: 49
Joined: June 22nd, 2008, 1:25 pm

Re: 4.7L, high compression, long rod, stroker project/parts for sale.

Postby hot_rod_hooligans » April 6th, 2017, 2:11 am

Block before
You do not have the required permissions to view the files attached to this post.

hot_rod_hooligans
I think I'll order a "tab"
I think I'll order a "tab"
Posts: 49
Joined: June 22nd, 2008, 1:25 pm

Re: 4.7L, high compression, long rod, stroker project/parts for sale.

Postby hot_rod_hooligans » April 6th, 2017, 2:13 am

Block after
You do not have the required permissions to view the files attached to this post.

hot_rod_hooligans
I think I'll order a "tab"
I think I'll order a "tab"
Posts: 49
Joined: June 22nd, 2008, 1:25 pm

Re: 4.7L, high compression, long rod, stroker project/parts for sale.

Postby hot_rod_hooligans » April 6th, 2017, 2:14 am

Pistons
You do not have the required permissions to view the files attached to this post.

JohnnyBertone
Posts: 7
Joined: April 30th, 2017, 7:05 pm
Stroker Displacement: 4.0
Vehicle Year: 2003
Vehicle Make: Jeep
Vehicle Model: WJ

Re: 4.7L, high compression, long rod, stroker project/parts for sale.

Postby JohnnyBertone » May 1st, 2017, 9:53 am

interested in the pistons crank and rods and cam,
p/n 68-239-4 wild for high compression, big lope
Comp timing chain set and lifters
Victor-Reinz complete gasket se
basically everything besides the block and head being that I have a WJ block and have 0331 tupy head.

just joined this forum so if you want to PM Me ill figure it out how to reply

Mogriff024
Posts: 1
Joined: May 7th, 2017, 8:05 pm
Stroker Displacement: 4.7
Vehicle Year: 2001
Vehicle Make: Jeep
Vehicle Model: Cherokee

Re: 4.7L, high compression, long rod, stroker project/parts for sale.

Postby Mogriff024 » May 13th, 2017, 9:12 pm

Definitely interested in the tupy head if it is still up for grabs, let me know what you'd want for it. I'd also take the rods if they are still Available.


Return to “For Sale”

Who is online

Users browsing this forum: No registered users and 1 guest