7120 head in 2002 WJ?

Newbies, and basic Stroker Recipes... Get started with your first stroker here!!
Post Reply
User avatar
Garmobozia1260
Posts: 9
Joined: March 20th, 2019, 9:04 pm
Stroker Displacement: 4.0
Vehicle Year: 2002
Vehicle Make: Jeep
Vehicle Model: WJ

7120 head in 2002 WJ?

Post by Garmobozia1260 »

Can the 7120 casting head be made to work in a 2002 Jeep Grand Cherokee WJ ?, if I'm doing a Viper coil mod at same time, I don't have to work about the coil rail mounting up, what else am I missing?
Kratos
Noob
Noob
Posts: 10
Joined: August 25th, 2020, 1:09 pm
Stroker Displacement: 4.6L
Vehicle Year: 2000
Vehicle Make: Jeep
Vehicle Model: Cherokee

Re: 7120 head in 2002 WJ?

Post by Kratos »

If I’m not mistaken you’ll have to have the appropriate exhaust manifold since the ports are larger and in slightly different spots on the later years. :D
User avatar
Garmobozia1260
Posts: 9
Joined: March 20th, 2019, 9:04 pm
Stroker Displacement: 4.0
Vehicle Year: 2002
Vehicle Make: Jeep
Vehicle Model: WJ

Re: 7120 head in 2002 WJ?

Post by Garmobozia1260 »

Already planning on header with stroker, so that part should be ok
Russ Pottenger
Strong Poster
Strong Poster
Posts: 891
Joined: August 15th, 2009, 1:27 am
Stroker Displacement: 4.7
Vehicle Year: 2000
Vehicle Make: Jeep
Vehicle Model: Cherokee

Re: 7120 head in 2002 WJ?

Post by Russ Pottenger »

You should be good to go.
Post Reply

Who is online

Users browsing this forum: No registered users and 13 guests