Scat crank woodruff keys
-
SkylinesSuck
- Donator
- Posts: 545
- Joined: February 14th, 2009, 11:11 pm
- Stroker Displacement: 4.6L
- Vehicle Year: 1998
- Vehicle Make: Jeep
- Vehicle Model: Wrangler
- Location: Northern VA
Scat crank woodruff keys
Two woodruff keys are required in my scat (and all) stroker cranks. The one under the dampner was already installed by the machine shop. The one under the timing gear needs installing. I have two in a baggy sitting here. One is the same size as the dampner one already installed. One is bigger. Which do I use?
-
Russ Pottenger
- Strong Poster
- Posts: 891
- Joined: August 15th, 2009, 1:27 am
- Stroker Displacement: 4.7
- Vehicle Year: 2000
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
Re: Scat crank woodruff keys
Chris,
You probably have it figured out by now but the Scat uses the two short 3/16 key’s
You probably have it figured out by now but the Scat uses the two short 3/16 key’s
-
SkylinesSuck
- Donator
- Posts: 545
- Joined: February 14th, 2009, 11:11 pm
- Stroker Displacement: 4.6L
- Vehicle Year: 1998
- Vehicle Make: Jeep
- Vehicle Model: Wrangler
- Location: Northern VA
Who is online
Users browsing this forum: No registered users and 15 guests