I am trying to figure out exactly what valve cover will work for my application, maybe without mods if that's possible.
I have the edelbrock aluminum head and am using 1.65 Harland sharp roller rockers.
Is there a valve cover that will drop right onto that setup?
Valve cover (edelbrock head, roller rocker arms)
-
- Making Progress
- Posts: 73
- Joined: November 2nd, 2015, 8:12 pm
- Vehicle Year: 1997
- Vehicle Make: Jeep
- Vehicle Model: XJ
- SkylinesSuck
- Donator
- Posts: 545
- Joined: February 14th, 2009, 11:11 pm
- Stroker Displacement: 4.6L
- Vehicle Year: 1998
- Vehicle Make: Jeep
- Vehicle Model: Wrangler
- Location: Northern VA
Re: Valve cover (edelbrock head, roller rocker arms)
I think must people run a spacer or just double gasket.
-
- Strong Poster
- Posts: 896
- Joined: August 15th, 2009, 1:27 am
- Stroker Displacement: 4.7
- Vehicle Year: 2000
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
Re: Valve cover (edelbrock head, roller rocker arms)
The cast finned Crown cover will work.
All other covers require some level of clearancing
All other covers require some level of clearancing
-
- Making Progress
- Posts: 73
- Joined: November 2nd, 2015, 8:12 pm
- Vehicle Year: 1997
- Vehicle Make: Jeep
- Vehicle Model: XJ
Re: Valve cover (edelbrock head, roller rocker arms)
https://www.quadratec.com/products/51104_08_07.htm
Like that one? I don't know exactly which one or years is finned and cast
Actually that seems like it must be stamped.
Do 4.2L valve covers work?
Like that one? I don't know exactly which one or years is finned and cast
Actually that seems like it must be stamped.
Do 4.2L valve covers work?
- SkylinesSuck
- Donator
- Posts: 545
- Joined: February 14th, 2009, 11:11 pm
- Stroker Displacement: 4.6L
- Vehicle Year: 1998
- Vehicle Make: Jeep
- Vehicle Model: Wrangler
- Location: Northern VA
Re: Valve cover (edelbrock head, roller rocker arms)
I have read 4.2L valve covers are not compatible. No first hand experience though.
-
- Strong Poster
- Posts: 896
- Joined: August 15th, 2009, 1:27 am
- Stroker Displacement: 4.7
- Vehicle Year: 2000
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
Re: Valve cover (edelbrock head, roller rocker arms)
That's the cover Brandon.BcurpKodiak wrote:https://www.quadratec.com/products/51104_08_07.htm
Like that one? I don't know exactly which one or years is finned and cast
Actually that seems like it must be stamped.
Do 4.2L valve covers work?
Who is online
Users browsing this forum: Ahrefs [Bot], Google [Bot] and 18 guests