Viewing profile - elbaldo3

Username:
elbaldo3
Groups:
Do you own a Stroker?:
Yes
Stroker Displacement:
4.6
Vehicle Year:
1999
Vehicle Make:
Jeep
Vehicle Model:
TJ
Vehicle Modifications:
Jeep Stroker 4.6 Build

Scat Crank
Keith Black 8.8:1 Pistons
Howards F1 Cam Duration 257/263, Lift .443/.448,
Melting HVSP oil pump
Block decked .015
Edelbrock Performer Head Ported but not Milled.
Johnson Hylift slow leak down Lifters.
Trend 9.600 Push Rods.
Scorpion 1.6:1 Roller Rocker Ams
Felpro .040 Head Gasket
62mm Throttle Body with spacer
24 lb/hr fuel injectors @52psi from Caddilac XLR 4.6
Cold Air intake
Header with 3 in exhaust pipe to Cat and 2.5 back
Flow cooler water pump (using waterless coolant)
Center force Flywheel (17 lb heavier than stock)
Center Force Stage 2 Clutch & Pressure plate

Jeep Setup
2 in budget lift
1.25 in body lift
1 in wheel spacers
Location:
Austin, TX

Contact elbaldo3

User statistics

Joined:
March 31st, 2021, 7:01 am
Last active:
September 28th, 2021, 9:22 am
Total posts:
2
(0.00% of all posts / 0.00 posts per day)
Most active forum:
Stroker & Performance Tech
(2 Posts / 100.00% of user’s posts)
Most active topic:
My Build and Performance
(2 Posts / 100.00% of user’s posts)