Viewing profile - Hedworx

Username:
Hedworx
Groups:
Do you own a Stroker?:
No
Vehicle Year:
1994
Vehicle Make:
Jeep
Vehicle Model:
Cherokee
Vehicle Modifications:
99+ intake manifold port matched to gasket
stock 0630 head, milled 30thou off the bottom, ported and polished, reground valve seats and new mopar springs and retainers, 50thou ground off the top of the valves, 43thou compressed HG
1.7 Yella Terra roller rockers
Comp 68-232-4 cam, lifters and timing chain
68mm painless performance TB, K&N filter on top.
flowkooler water pump and 195 thermostat
LS1 injectors, and 44psi fuel pressure reg
Headers and full 2.5" exhaust, hi-flow cat

Pretty much all the bolt on performance you can do before the stroker plunge is made.

Contact Hedworx

User statistics

Joined:
April 2nd, 2017, 5:28 am
Last active:
August 12th, 2022, 7:14 pm
Total posts:
4
(0.01% of all posts / 0.00 posts per day)
Most active forum:
Stroker & Performance Tech
(3 Posts / 75.00% of user’s posts)
Most active topic:
'Street' 4.7 stroker build
(1 Post / 25.00% of user’s posts)