Viewing profile - kensommers

Username:
kensommers
Age:
56
Groups:
Do you own a Stroker?:
Yes
Stroker Displacement:
4.6
Vehicle Year:
2001
Vehicle Make:
Jeep
Vehicle Model:
XJ
Vehicle Modifications:
6 inch custom lift.w/Rancho my ride wireless shock tuning. Custom front & rear bumper. Full length custom roof rack w/ rear 4 inch HIDS, Pair of 7inch HID's up front.Rocky Road Rock rails, Total Fab lower panel armor, . FULL SKID PACKAGE. RUGGED RIDGE HD SYE, Tom Woods CV Rear driveshaft.Rocky Road Drop Control arm kit.(SICK FLEX). BUSHWACKET CUT OUT FLARES W/trimmed to the pinch seam &MIG welded, maximizing wheel travel & minimizing cut tires. 35"inch MT Mud Terain s. FORD 8.8 REAR E/ 31 SPLINE SHAFTS , 3 &1/4" axle tubes 1/4" thick tubes(Beefy) 4.56 Precision Gear R&P ,TIMKIN BEARINGS & EATON E-LOCKER. 2001 I-6 block W/#723 twelve Counter weight crank out of a 83 Cj7. Snout machine grinded <1cm. Clevite 77 Performance Mains & Rod bearings. Silvolite pistons & 4.2 rods. Neon 24lb injectors, SEALED POWER ROCKERS, PUSH. RODS, & LIFTERS. MELLING stock CAM. Head and intake manifold port
Match & polished. ODESSA 0331 Head( My research tells me this is the best of all the Heads allbeit the tendency for them to crack. Enter the 20lbs heavier reinforced Odessa 0331 Head) Thor cowl induction air intake & 62mm TB. Hot Rod Flatz black laid down by me. Machine work by WAYNES engine Riverside Ca
Occupation:
Clinical exercise specialist and strength coach..
Location:
Irvine, CA

Contact kensommers

User statistics

Joined:
March 8th, 2011, 9:00 am
Last active:
July 26th, 2016, 12:42 pm
Total posts:
3
(0.01% of all posts / 0.00 posts per day)
Most active forum:
Stroker Basics
(3 Posts / 100.00% of user’s posts)
Most active topic:
Oil pump checks
(3 Posts / 100.00% of user’s posts)