denso 12582704 injectors
-
- Making Progress
- Posts: 59
- Joined: June 2nd, 2021, 1:36 pm
- Stroker Displacement: 4.6
- Vehicle Year: 1998
- Vehicle Make: jeep
- Vehicle Model: xj
denso 12582704 injectors
as anyone ever used these injectors and was it a plug and play? did you like them?
- Cheromaniac
- I live here
- Posts: 3208
- Joined: March 8th, 2008, 12:58 pm
- Stroker Displacement: 4563cc
- Vehicle Year: 1992
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
- Location: Cyprus
- Contact:
Re: denso 12582704 injectors
They're rated to flow 25.1lb/hr at 43.5psi and being an Uscar EV6 type, they'll be plug n' play on '96+ Jeeps.
Since '96-'04 operate at a fuel pressure of 49psi, those injectors would flow 26.6lb/hr which is enough to fuel a stroker making close to 270 crank HP.
The '05-'06 TJ operates at a fuel pressure of 58psi, and the same injectors used here would flow 29.0lb/hr which is enough to power a stroker making close to 300 crank HP.
Since '96-'04 operate at a fuel pressure of 49psi, those injectors would flow 26.6lb/hr which is enough to fuel a stroker making close to 270 crank HP.
The '05-'06 TJ operates at a fuel pressure of 58psi, and the same injectors used here would flow 29.0lb/hr which is enough to power a stroker making close to 300 crank HP.
1992 XJ 4.6 I6 - 5MT - Stroker build-up, Stroker "recipes" Sold
1995 Mustang GT - 4AT - Modded Sold
2006 Mustang GT - 5MT - Modded Midlife Crisis Car
1995 Mustang GT - 4AT - Modded Sold
2006 Mustang GT - 5MT - Modded Midlife Crisis Car
-
- Making Progress
- Posts: 59
- Joined: June 2nd, 2021, 1:36 pm
- Stroker Displacement: 4.6
- Vehicle Year: 1998
- Vehicle Make: jeep
- Vehicle Model: xj
Re: denso 12582704 injectors
thank you. this is going into a very strong 4.6 stroker. from what you have tolled me this is just what I need.
thank you very much
thank you very much
Who is online
Users browsing this forum: No registered users and 1 guest