Pricing used stroker parts

Off topic, play nice. No Nudity, Pornographic material etc..
Post Reply
User avatar
cruiser54
Donator
Donator
Posts: 204
Joined: November 3rd, 2009, 4:38 pm
Stroker Displacement: 4.6
Vehicle Year: 1990
Vehicle Make: Jeep
Vehicle Model: Comanche
Contact:

Pricing used stroker parts

Post by cruiser54 »

258 12CW crank needs turning.
Six 248 rods
2686 head disassembled
865 block.

A guy here in town is interested in the stuff to build a short block while he drives his worn out 4.0.

Any idea on fair pricing?
Cruiser's Mostly Renix Tips can be found here :
www.cruiser54.com
Wanna view my technical photos? WARNING: Renix heavy!!
http://www.cherokeeforum.com/g/album/1725214
akadeutsch
Movin on up ^
Movin on up ^
Posts: 312
Joined: February 22nd, 2014, 7:27 pm
Stroker Displacement: 4.6
Vehicle Year: 1981
Vehicle Make: Jeep
Vehicle Model: CJ8
Location: New Prague, MN

Re: Pricing used stroker parts

Post by akadeutsch »

I got a complete 258 engine off Craigslist for 100 bucks.
User avatar
cruiser54
Donator
Donator
Posts: 204
Joined: November 3rd, 2009, 4:38 pm
Stroker Displacement: 4.6
Vehicle Year: 1990
Vehicle Make: Jeep
Vehicle Model: Comanche
Contact:

Re: Pricing used stroker parts

Post by cruiser54 »

I got one for free. I'm trying to get a feel for what the crank and rods are worth in the market.
Cruiser's Mostly Renix Tips can be found here :
www.cruiser54.com
Wanna view my technical photos? WARNING: Renix heavy!!
http://www.cherokeeforum.com/g/album/1725214
akadeutsch
Movin on up ^
Movin on up ^
Posts: 312
Joined: February 22nd, 2014, 7:27 pm
Stroker Displacement: 4.6
Vehicle Year: 1981
Vehicle Make: Jeep
Vehicle Model: CJ8
Location: New Prague, MN

Re: Pricing used stroker parts

Post by akadeutsch »

I would say 100 bucks for the crank and rods and another 100 for the block and head. Although that head is pretty much junk. I would have a hard time paying more.
User avatar
cruiser54
Donator
Donator
Posts: 204
Joined: November 3rd, 2009, 4:38 pm
Stroker Displacement: 4.6
Vehicle Year: 1990
Vehicle Make: Jeep
Vehicle Model: Comanche
Contact:

Re: Pricing used stroker parts

Post by cruiser54 »

I don't care about the block and head.

I have a 258 crank and rods and want to find a good market value for them from those who are in the know so I don't give them away or charge too much.
Cruiser's Mostly Renix Tips can be found here :
www.cruiser54.com
Wanna view my technical photos? WARNING: Renix heavy!!
http://www.cherokeeforum.com/g/album/1725214
akadeutsch
Movin on up ^
Movin on up ^
Posts: 312
Joined: February 22nd, 2014, 7:27 pm
Stroker Displacement: 4.6
Vehicle Year: 1981
Vehicle Make: Jeep
Vehicle Model: CJ8
Location: New Prague, MN

Re: Pricing used stroker parts

Post by akadeutsch »

I wouldn't pay more than 100 bucks for a 258 crank and rods. :deadhorse:
User avatar
cruiser54
Donator
Donator
Posts: 204
Joined: November 3rd, 2009, 4:38 pm
Stroker Displacement: 4.6
Vehicle Year: 1990
Vehicle Make: Jeep
Vehicle Model: Comanche
Contact:

Re: Pricing used stroker parts

Post by cruiser54 »

akadeutsch wrote:I wouldn't pay more than 100 bucks for a 258 crank and rods. :deadhorse:
That's you. I wanna find out what market value is. What OTHER people have paid.
Cruiser's Mostly Renix Tips can be found here :
www.cruiser54.com
Wanna view my technical photos? WARNING: Renix heavy!!
http://www.cherokeeforum.com/g/album/1725214
johnj92131
Making Progress
Making Progress
Posts: 57
Joined: June 26th, 2008, 9:52 pm

Re: Pricing used stroker parts

Post by johnj92131 »

I paid $75 for a 258 long block. Knew the block had a rod knock. So for $75 I have 6 rods and a crank that needs to be turned. Figured any used crank would need some work and the short rods were a bonus for the money. So I will spend $65 to have the rods resized and just under $100 to have the crank turned. More for a new set of bearings. Shop wanted $300 for a reground crank, bearings and rods were extra. Hope this helps.
biscuit
I think I'll order a "tab"
I think I'll order a "tab"
Posts: 40
Joined: April 6th, 2015, 4:23 am
Stroker Displacement: 4.6
Vehicle Year: 2002
Vehicle Make: jeep
Vehicle Model: wj

Re: Pricing used stroker parts

Post by biscuit »

i think i paid $100 for a complete 258
Russ Pottenger
Strong Poster
Strong Poster
Posts: 908
Joined: August 15th, 2009, 1:27 am
Stroker Displacement: 4.7
Vehicle Year: 2000
Vehicle Make: Jeep
Vehicle Model: Cherokee

Re: Pricing used stroker parts

Post by Russ Pottenger »

A good 12 counterweight 258 crankshaft is worth every bit of $150.00 and another $50.00 for the rods.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest