New to the site, been lurking, researching and reading for over 6 months though. I'm in the process of finishing up a 4.6L stroker build. I figured i would start a thread, share some pics with everyone. I started this build last fall, a friend of mine did all of the machining and assembly work. I just supplied him with the goodies.
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
94' 4.0 block
port and polished 7120 head
reground .010 undersize 258 crank
4.0 connecting rods
arp main and rod bolts
keith black ic944 .030 over pistons
comp cams 68-231-4 camshaft
mopar performance valve springs
mopar high volume oil pump
flowkooler high flow water pump
mopar .043 head gasket
all new cam, main and rod bearings
new harmonic balancer
high flow thermostat
high flow thermostat housing
random parts
![Image](http://i981.photobucket.com/albums/ae293/ortloff65/Mobile%20Uploads/20140120_131418_zpsx7t3ecrp.jpg)
bottom end all assembled! decked the block appx. .020, new freeze plugs and a fresh coat of paint.
![Image](http://i981.photobucket.com/albums/ae293/ortloff65/Mobile%20Uploads/IMG950656_zpsyiytdvv9.jpg)
All assembled! and freshly painted.
![Image](http://i981.photobucket.com/albums/ae293/ortloff65/Mobile%20Uploads/IMG_105542565101635_zps1vwoisln.jpeg)
This is the jeep that it will be going in. Aside from the motor the rest of the jeep is stock. I race it at a few local tracks, where they call it "beater cross". Reason for building the stroker is I keep losing to a friend with a v8 5.2 grand cherokee
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Image](http://i981.photobucket.com/albums/ae293/ortloff65/Mobile%20Uploads/20140316_180615_zps0gsviagi.jpg)
Pic taken 2 years ago of another jeep i own. this ones completely stock
![Image](http://i981.photobucket.com/albums/ae293/ortloff65/race_zpsb765ddb5.jpg)
I just pulled my jeep into the garage and am getting ready to do the swap. I've done about a half dozen 4.0 swaps already so this one shouldn't be to bad. I'm planning on putting an AW4 behind the stroker and ditching the 42re. I just need to figure out the wiring for that.
I still need a few more parts too, looking for a 62mm throttle body, 24lb injectors, If someone can recommend a set from summit or jegs that would be sweet!. I hope to have this thing running In 2 or 3 weeks, then bring it in and have it dyno'ed.
![Rock Out! :rockout:](./images/smilies/rockout.gif)