What year is my crank case?
-
- Posts: 4
- Joined: November 1st, 2013, 7:24 am
- Stroker Displacement: 4.0
- Vehicle Year: 1990
- Vehicle Make: jeep
- Vehicle Model: wrangler
What year is my crank case?
I bought a 90 wrangler with a 4.0 in it, the number between #2 and 3 cylinder is stamped 002CLI3 on spark plug side on the machined surface, and 3235444 cast in the block under the intake.
- amcinstaller
- I love JeepStrokers.com!!
- Posts: 611
- Joined: May 22nd, 2008, 11:57 pm
- Stroker Displacement: 4.6L
- Vehicle Year: 1980
- Vehicle Make: AMC
- Vehicle Model: Spirit
- Location: Red Deer, AB, Can
Re: What year is my crank case?
you can find that info and much more in our faq section. heres the blocks faq link:
http://www.jeepstrokers.com/forum/viewt ... ?f=34&t=52
http://www.jeepstrokers.com/forum/viewt ... ?f=34&t=52
1980 AMC Spirit Restomod in Progress
SilverXJ wrote:Roller rockers won't help that mess you have created. Nor will God for that matter.
-
- Posts: 4
- Joined: November 1st, 2013, 7:24 am
- Stroker Displacement: 4.0
- Vehicle Year: 1990
- Vehicle Make: jeep
- Vehicle Model: wrangler
Re: What year is my crank case?
from what I'm gathering from 002CLI3 is
0 = 2000
02 = feb
c = 2 barrel, but it is fuel injected [ I may be reading this wrong ]
l = 232
3 = 3rd day
EF3235444 don't match anything
0 = 2000
02 = feb
c = 2 barrel, but it is fuel injected [ I may be reading this wrong ]
l = 232
3 = 3rd day
EF3235444 don't match anything
- IH 392
- I love JeepStrokers.com!!
- Posts: 725
- Joined: October 4th, 2008, 11:15 am
- Location: Eugene ORYGUN
- Contact:
Re: What year is my crank case?
I read it as 1990, February, 258ci 2v, 13th day.
3235444 is the casting # for a '83-'90 258 block.
It is PORT injected??
3235444 is the casting # for a '83-'90 258 block.
It is PORT injected??
You can get more power out of ANY engine!!!
ASE Master certified engine machinist, gas and diesel
ASE Master certified engine machinist, gas and diesel
-
- Posts: 4
- Joined: November 1st, 2013, 7:24 am
- Stroker Displacement: 4.0
- Vehicle Year: 1990
- Vehicle Make: jeep
- Vehicle Model: wrangler
Re: What year is my crank case?
I did some research and it turns out I have a 4.2 with a mopar mpi performance kit.
-
- I made it to triple digits!
- Posts: 172
- Joined: March 28th, 2010, 9:31 am
- Stroker Displacement: 4.2
- Vehicle Year: 1987
- Vehicle Make: jeep
- Vehicle Model: wrangler
Re: What year is my crank case?
x2 on IH 392's read on this. "C" was for 258/4.2l and "M" was for 243/4.0l. Not sure where you're getting the "L" from?Uncle Dude wrote:from what I'm gathering from 002CLI3 is
0 = 2000
02 = feb
c = 2 barrel, but it is fuel injected [ I may be reading this wrong ]
l = 232
3 = 3rd day
EF3235444 don't match anything
If you have the fuel injection, someone put it on the 258 (could have been the Mopar retrofit or DIY), or you have the 4.0l head and fuel injection. Now it would be good to know if you have the 2686 RENIX head and FI, or the 7120 head with OBD1......or even a later head and system.
- IH 392
- I love JeepStrokers.com!!
- Posts: 725
- Joined: October 4th, 2008, 11:15 am
- Location: Eugene ORYGUN
- Contact:
Re: What year is my crank case?
See if you can find the casting # on the head and post it, I'm curious too.
You can get more power out of ANY engine!!!
ASE Master certified engine machinist, gas and diesel
ASE Master certified engine machinist, gas and diesel
-
- Posts: 4
- Joined: November 1st, 2013, 7:24 am
- Stroker Displacement: 4.0
- Vehicle Year: 1990
- Vehicle Make: jeep
- Vehicle Model: wrangler
Re: What year is my crank case?
where can I find the casting # on the head?
The intake manifold is part# is 5300235, with 11596 under it if that helps.
I'm seeing a solid L as the 5th character on the block??
The intake manifold is part# is 5300235, with 11596 under it if that helps.
I'm seeing a solid L as the 5th character on the block??
-
- I made it to triple digits!
- Posts: 172
- Joined: March 28th, 2010, 9:31 am
- Stroker Displacement: 4.2
- Vehicle Year: 1987
- Vehicle Make: jeep
- Vehicle Model: wrangler
Re: What year is my crank case?
The casting number on the head is usually on the top of the intake/exhaust flange just outside the edge of the valve cover.
Who is online
Users browsing this forum: No registered users and 1 guest